1269469526 Two Handles Chrome Widespread Waterfall Bathroom Sink Faucet (0778 ...

We guarantee our promise that your faucets will always get to you on time

  • Order Processing Time: 7 working days
  • Shipping Time: 5-8 working days

Image Details

Please kindly note image below is just for your reference.
Different faucets are shipped with different accessories.

A: Hose

B: Other accessories for fixture

Tools You need for Installation

  • Adjustable wrench
  • Tape
  • Screwdriver
  • Flashlight

General Faucet Installation Instruction

Please kindly note that this is just a general instruction, each faucet you buy from us has installation instruction with details inside package.

Step 1: Position the Faucet

A: begin installing your faucet by placing the gasket and faucet in position on the sink.

B: from under the sink, thread the plastic mounting nuts onto the faucet shanks. be sure the large side of each plastic mounting nut is up.

C: from the top of the sink, check the faucet and gasket position.

D: from under the sink tighten the mounting nuts, making certain not to over-tighten which could damage the nuts and make them difficult to remove in the future.

Step 2: Attach the Water Supply Tubes

A: Wrap the threads of the water-supply valve with Teflon tape. Although most plumbers use only Teflon tape, some plumbing supply manufacturers also recommend using plumber’s putty.

B: Thread the water supply nut onto the shut-off valve. Tighten the nut with a wrench.

C: Wrap the threads on the faucet shank with Teflon tape, and then thread the water supply nut onto the faucet shank.

D: Tighten the nut with a wrench.

Step 3: Connect the Faucet Lift Rod

A-1: from the top of the sink, insert the lift-rod into the faucet.

A-2: from under the sink, make sure the pivot-rod is in the down position. Insert the lift-rod into the lift-rod strap. Tighten the screw.

B-1: from the top of the sink, make sure the lift-rod opens and closes the drain plug as desired.

B-2: Make any needed adjustments by loosening the lift-rod strap screw and repositioning the lift-rod.

B-3: If you need to connect the lift-rod strap to the pivot rod, slide one end of the spring clip onto the pivot-rod.

B-4: Make sure that both the pivot -rod and the lift-rod are in the down position. Insert the pivot-rod in the closest hole in the lift-rod strap.

B-5: Slide the other end of the pivot-rod. Make sure the lift-rod opens and closes the drain plug as desired.

C-1: Make minor adjustments by loosening the lift-rod strap screw and repositioning the lift-rod.

C-2: Make major adjustments by removing the spring clip and moving the pivot-rod to a different hole in the lift-rod strap.

Step 4: Flush the Faucet

A-1: Anytime you work on plumbing, filings, chips, and other debris can fall into the plumbing pipes.

A-2: this debris can damage the sealing surfaces inside the faucet and cause leaks.

A-3: Remove aerator and black sealing gasket above it.

A-4: before turning on the water supply, make sure the faucet handles are open (on position) in order to remove the debris without causing damage.

B: Open both water supply valves under the sink.

C-1: allow the water to run for 15 seconds.

C-2: Close the faucet handles (turn off).

D: Make sure any debris is cleaned from the aerator screen.

E: Replace the aerator.

Two Handles Chrome Widespread Waterfall Bathroom Sink Faucet (0778 ...

Related products:

  1. Single Handle LED Chrome Waterfall Bathroom Sink Faucet (0599 …
  2. Single Handle Chrome Waterfall Bathroom Sink Faucet (0599 -QH210 …
  3. Single Handle Nickel Brushed Centerset Bathroom Sink Faucet 0572-8251
  4. Single Handle Nickel Brushed Centerset Bathroom Sink Faucet (0913 …
  5. How to Efficiently Install a New Bathroom Faucet

Tagged with: • • • • • • • • •

Filed under: News

Like this post? Subscribe to my RSS feed and get loads more!